Understanding the Process of Mounting Solar Panels

Mounting Solar panels in Ocala, FL

If you’re investigating the possibility of using solar panels for your home in The Villages, you may be curious about how the installation process works. You will need to hire a state-certified solar contractor for your solar panel installation, as it is a delicate and complicated procedure. Here is a look at the process of mounting solar panels on your home.

Determining the Best Place for Solar Panel Installation
The person who installs solar panels in your home will first need to determine the best place for installation. This primarily depends upon the type of roof that your home has. Shingles work best for solar panel installation, but roofs with uneven surfaces, such as tile roofs, are more challenging. You can also choose to have your solar panels installed on stand-alone racks. This is beneficial because you will retain unrestricted access to your roof to make repairs or to install other necessities. Whether you choose to have the panels installed on your roof or on racks, your installer will make sure that they are placed in an area that gets the most sun throughout the day.

Obtain the Necessary Permits Mounting Solar Panels
Before you can pick a date for your solar panel installation, you will need to obtain the necessary permits. Your solar panel installer will obtain these permits from your local city or county building department. Your HOA cannot prevent you from installing a renewable energy system on your property. If you are the first person in your area to install a solar power system, you and your installer will need to work closely with your local building officials to ensure the project goes smoothly.

Solar Panel Mounting and Installation
Once you have obtained permits and decided on an installation location, your installer will begin mounting and installing your solar panels. The panels will be mounted at the proper angle and secured with stainless steel bolts. They will then be connected to each other and your home using junction boxes and wires. This must be done according to your local building codes.